Embedded data sensor
After the equipment is powered off and then powered on, the equipment can still start and work automatically, and the cycle test is 5 times without any bad phenomena;The device can support inserting RS232, RS485 card, IO card, and SD card (within 128G) storage;Equipment dustproof and waterproof grade≥IP56;The highest temperature test is 60%, and the lowest temperature test is 0%. The equipment can still work normally without any bad phenomena; packet loss rate: 16k data is continuously transmitted, Less than 0.1%;Frame loss rate: continuous transmission of 2Gb data, Less than 0.1%;
Integrated asset management operation and maintenance
The highest temperature test is 65°C, and the lowest temperature test is 0°C. The equipment can still work normally without any defects; it can find out the recorded asset status and location in the system;Able to check the status of the equipment for record;The maximum number of channels for reading tags on a single control board is 12;With the function of dynamic visualization topology map;
Integrated cabinet monitoring equipment
The monitoring interface displays the environment inside the cabinet. The client will automatically alarm when the temperature reaches 70°C; the prototype monitoring terminal will automatically alarm when the dust concentration reaches 10mg/m³; it can detect the water immersion in the cabinet. When the thick yellow line is placed in the water, the prototype monitors the web page water The immersion light is on; when the equipment is shaken, the vibration status light is on, and the monitoring webpage has an alarm; the overload automatically cuts off the power supply function, when the voltage exceeds the set threshold, the system will automatically cut off the power supply and alarm, with the equipment status detection function.
Cloud bayonet data collector
Support repeated power failure, automatic restart function, the device can work normally after automatic restart;The equipment has control functions for data flow;The device screen is small and easy to carry;The equipment can be used for system maintenance;The device supports hot-swappable expansion cards more than 100 times, and the device works normally;Frame loss rate: continuous transmission of 1Gb data, Less than 0.1%;Connectivity rate: 10,000 uninterrupted connections, >99.9%;
Infrared temperature measurement equipment for lane drivers
The equipment has infrared temperature measurement function, and the measurement error is ≤0.3℃;The equipment has alarm indicator and voice broadcast function, and the temperature measurement result above 37.7℃ will automatically initiate an alarm;The device has a two-dimensional code and a touch guide screen, which can chase the drivers face to capture the face.